Cyber Suite LED Keypad Instalační manuál stáhnout pdf (Strana 17)

CYB-KLED CyberSuite Installation Manual

TIMING (MENU 1)

ALL 3 Digits of the timer value MUST be entered when

programming a timer. This means that for addresses below

100, you must enter [0] then the 2 digits of the address. For

addresses below 10, you must enter [0] , [0] followed by the

address digit.

Entry Delay Timer ([MENU] [1], [1])

The entry delay timer is programmable from 000 to 255 seconds

(Default 30 Seconds).

To program the timer value, press

[MENU] , [1] , [1] , [TIM 1], [TIM 2] , [TIM 3] , [ENTER]

Where TIM 1 ~ 3 are the timer value digits, entered using the 0 to 9

number keys.

Programming the entry delay timer to 0 will result in no entry delay

operation for any zone that has been assigned the entry delay zone

type.

Exit Delay Timer ([MENU] , [1] , [2])

The exit timer is programmable from 000 to 255 seconds (Default 30

Seconds).

To program the timer value, press

[MENU] , [1] , [2] , [TIM 1], [TIM 2] , [TIM 3] , [ENTER]

Where TIM 1 ~ 3 are the timer value digits, entered using the 0 to 9

number keys.

Programming the exit delay timer to 0 will result in no exit delay, the

system will immediately arm the CyberSuite System.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Žádné komentáře

Cyber Suite LED Keypad Instalační manuál Strana 17